LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Cooling System) >> Diagnostic Information and Procedures >> Scan Tool Output Controls (2.2L L61)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Scan Tool Output Controls (2.2L L61)

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
Powertrain Control Module (PCM) - 2.2 Liter (L61)

Scan Tool Output Control Additional Menu Selection(s) Description
Fan Control 1 Fan Relays The scan tool displays a Commanded State of None, Off or On. This allows you to communicate with the PCM and deactivate or activate the cooling fan 1 relay, manually turning both fans Off, or On in low speed.
Fan Control 2 Fan Relays The scan tool displays a Commanded State of None, Off or On. This allows you to communicate with the PCM to deactivate or activate the cooling fan 2 and the cooling fan mode relays, manually turning the right fan Off, or On in high speed.
Fan Control 1 and 2 Fan Relays The scan tool displays a Commanded State of None, Off or On. This allows you to communicate with the PCM to deactivate or activate the cooling fan 1, the cooling fan 2, and the cooling fan mode relays, manually turning both fans Off, or On in high speed.
scientia non olet · About LEMON Manuals