LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication Systems >> Repair Instructions >> Bracket Assembly Replacement - OnStar® Module >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Positioning Module Bracket In Vehicle
    GM1530173Courtesy of GENERAL MOTORS CORP.
  1. Position the module bracket in the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install 3 module bracket mounting bolts.

    Tighten:  Tighten the module bracket bolts to 10 N.m (89 lb in).

    3. Fig 2: Connecting Inverter Electrical Connector
    GM1530168Courtesy of GENERAL MOTORS CORP.
  3. Connect the inverter electrical connector (2).
  4. Clip the antenna and module harness (1), to the module bracket.
  5. Install the communication vehicle interface unit. Refer to OnStar® Vehicle Interface Unit (VIU) Replacement .
  6. Install the communication interface module. Refer to Communication Interface Module Replacement .
scientia non olet · About LEMON Manuals