LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> Pursuit (CANADA) L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Powertrain Control Module Programming and Setup
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Powertrain Control Module Programming and Setup



POWERTRAIN CONTROL MODULE PROGRAMMING AND SETUP

The following service procedures require either a programming or a setup event be performed for a complete repair.

Powertrain Control Module (PCM) Replacement
If the powertrain control module (PCM) is replaced, the following procedures must be performed:
1. PCM Reprogramming-Refer to Service Programming System (SPS).
2. Crankshaft Position (CKP) Variation Learn-Refer to CKP System Variation Learn Procedure in Computers and Control Systems - 2.2L (L61).

PCM Reprogramming
If the PCM needs to be reprogrammed, refer to Service Programming System (SPS).

Setup for Component Replacement
The replacement of some components will require a setup procedure for complete repair.

If any of the following components are replaced, a crankshaft position (CKP) variation learn procedure must be performed. Refer to CKP System Variation Learn Procedure in Computers and Control Systems - 2.2L (L61).
- Engine replacement
- Any engine repair that disturbs the crankshaft position CKP sensor or its relationship with the crankshaft reluctor wheel
- CKP sensor
scientia non olet · About LEMON Manuals