Initialization Sequence
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
The electronic brake control module (EBCM) performs 1 initialization test each ignition cycle. The initialization of the EBCM occurs when 1 set of the following conditions occur:
- The EBCM detects that there is a minimum of 500 RPM from the powertrain control module (PCM) via a serial data message.
- The brake pedal is not applied.
OR
- The vehicle speed is greater than 16 km/h (10 mph).
- The brake pedal is applied.