Scan Tool Data List
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF | |||
| Electronics Battery Fd | Data | Volts | 12.6 Volts |
| Load Shed | Inputs | None/Load 1//Load 2/Load 3 | None |
| Inadvertent Power Relay | Outputs | On/Off | Off |
| Load Management Relay | Outputs | On/Off | Off |
Powertrain Control Module (PCM 3.4L LA1)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF | |||
| Crank Request Signal | Engine Data 2 | Yes/No | No |
| GEN F-Terminal Signal | Engine Data 2 | % | 0% |
| GEN L-Terminal Signal Command | Engine Data 2 | On/Off | Off |
| Ignition 1 Signal | Engine Data 1 | Volts | 12.6 Volts |
| Starter Enable Relay Circuit Status | Output Driver Data | Fault/OK/Invalid State | OK |
| Starter Relay Command | Engine Data 2 | On/Off | Off |
Engine Control Module (ECM 3.6L LY7)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF | |||
| Crank Request Signal | Electrical/Theft Data | Yes/No | No |
| GEN F-Terminal Signal | Electrical/Theft Data | % | 0% |
| GEN L-Terminal Signal Command | Electrical/Theft Data | On/Off | Off |
| Ignition 1 Signal | Electrical/Theft Data | Volts | 12.6 Volts |
| Starter Relay Command | Electrical/Theft Data | On/Off | Off |