Component Testing
CAUTION:
Refer to SIR Caution
.
- Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
- Test for less than 2400 ohms of resistance between the signal circuit terminal 5 the 10-volt reference terminal 1.
- If greater than the specified value, replace the steering wheel control switch.
- Test for infinite resistance between the signal circuit terminal 4 and the10-volt reference circuit terminal 1 with the switch in the open position.
- If not the specified value, replace the steering wheel control switch.
- Test for less than 2400 ohms of resistance between the signal circuit terminal 4 and the 10-volt reference circuit terminal 1 with the switch in the closed position.
- If greater than the specified value, replace the right steering wheel control switch.
- Disconnect the harness connector at the left steering wheel control switch.
- Test for infinite resistance between the signal terminal 1 and the signal terminal 4 with the switch in the open position.
- If not the specified value, replace the steering wheel control switch.
- Test for less than 12000 ohms of resistance between the signal terminal 4 and the signal terminal 1 with the switch in the closed position.
- If greater than the specified value, replace the steering wheel control switch.