Circuit/System Verification
- Operate the vehicle at idle and at various engine speeds and load ranges while observing the Int. CMP Variance, Desired Int. CMP, and Int. CMP Angle parameters with a scan tool.
- The Int. CMP Variance should remain less than or equal to 1 degree unless the intake CMP actuator is being commanded. If the intake CMP actuator is moved, the Int. CMP Variance will rise for 1-2 seconds until the Int. CMP Angle parameter matches the Desired Int. CMP parameter. The Int. CMP Variance should again return to less than or equal to 1 degree.
- If the Int. CMP Variance remains more than 1 degree for more than 3 seconds, continue with the Circuit/System Testing.