LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Data Communication System) >> Diagnostic Information and Procedures >> Scan Tool Does Not Communicate with Class 2 Device >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. Connecting a scan tool to the data link connector (DLC) allows communication with the modules for diagnostic purposes. The class 2 serial data circuit uses JX 205 (splice pack comb) as a common connection between some modules and the DLC. DTCs may be set due to this symptom and during this diagnostic procedure.

scientia non olet · About LEMON Manuals