LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Solstice Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Programming and Setup >> Sensing and Diagnostic Module (SDM) Replacement and Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensing and Diagnostic Module (SDM) Replacement and Reprogramming

If the SDM is replaced or requires reprogramming, the following procedures must be performed in the specified order:

  1. Setup SDM- Using a scan tool, go to Vehicle Control Systems » Computer/Integrating Systems » Module Setup » Supplemental Inflatable Restraint. Select Setup New SDM and follow the on-screen instructions.
  2. Setup SDM Part Number in BCM - Using a scan tool, go to Vehicle Control Systems » Computer/Integrating Systems » Module Setup » Supplemental Inflatable Restraint. Select Setup SDM Part Number in BCM and follow the on-screen instructions.
scientia non olet · About LEMON Manuals