Component Testing
IMPORTANT:
Vehicle may be equipped with sectioned coax. Test each section and replace only the faulty section, not the entire length or coax.
- Disconnect the navigation antenna coax cable from the navigation antenna within the wiring harness.
- Disconnect the navigation antenna from the VCIM.
- Test for infinite resistance between the center conductor of the coax to the metal outer shield.
- If it does not read infinite, replace the navigation antenna coax cable.
- Test for greater than 1 ohm resistance at the navigation antenna coax center conductor from end to end.
- If less than specified value, replace the navigation antenna assembly.
- If greater specified value, replace the navigation antenna coax cable.