LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Torrent AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction (2 Of 2) >> Repair Instructions >> Engine Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying ECM Wiring Harness Electrical Connectors
    GM1822910Courtesy of GENERAL MOTORS CORP.
  1. Connect the engine wiring harness electrical connectors (2) to the ECM.
  2. Place the ECM on the battery shield.
    3. Fig 2: View Of ECM & Retainer
    GM1822915Courtesy of GENERAL MOTORS CORP.
  3. Install the ECM to the retainer.
    4. Fig 3: View Of ECM Retainer & Top Of Battery Shield
    GM1822389Courtesy of GENERAL MOTORS CORP.
  4. Position the ECM and retainer to the top of the battery shield.
  5. Slide the ECM retainer rearward, engaging the retainer to the battery shield.
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  7. Reprogram the PCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals