LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions >> Vehicle Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Apply J 36850  to the VSS O-ring.
    2. NOTE: Refer to Fastener Notice .
  2. Install the Vehicle Speed Sensor (VSS) into the transaxle case. Secure the VSS with the retaining bolt.

    Tighten:  Tighten the VSS speed sensor (VSS) bolt to 6 N.m (53 lb in).

    3. Fig 1: VSS Electrical Connector
    GM242756Courtesy of GENERAL MOTORS CORP.
  3. Connect the VSS electrical connector (1).
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals