LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Keyless Entry System And Remote Functions) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Remote Control Door Lock Receiver
    GM1357199Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Align the receiver retainer to the openings in the rear shelf. Install the receiver.
  3. Install the sound barrier.
  4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  5. After replacement of the remote control door lock receiver, the transmitters will have to be programmed to the receiver. Refer to Transmitter Programming .
  6. Refer to Control Module References for programming and setup information.