LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Solstice Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Vehicle Diagnostic Information - Diagnostic Information And Procedures) >> Specifications >> Theft Deterrent Module Scan Tool Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Theft Deterrent Module Scan Tool Information

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Theft Deterrent Module Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions:  Ignition ON
Auto Learn - Disabled The scan tool displays Enabled or Disabled. This is the state of the automatic learn.
Auto Learn Counter - Varies This displays Counts.
Auto. Learn Timer - Varies This displays min.
Battery Voltage - Varies This displays Volts. This is the current battery voltage.
Ignition Voltage - Varies This displays Volts. This is the current ignition voltage.
Learned Keys Required - Varies The scan tool displays 1 or 2. This is the required number of learned keys.
Master Keys Learned - Varies This displays Counts.
PCM Auto. Learn Timer - Inactive The scan tool displays Active or Inactive. This is the state of the automatic learn timer.
PCM Fail Enable - Inactive The scan tool displays Active or Inactive. This is the state of the fail enable.
PCM Fuel Continue - Inactive The scan tool displays Active or Inactive. This is the state of the fuel continue.
PCM Password Learning - Inactive The scan tool displays Active or Inactive. This is the state of the password learning.
PCM Password Status - Valid The scan tool displays Tamper, Undecided, Valid or No Info.
Power Mode - Run The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch.
Previous TDM State - Varies The scan tool displays Asleep, Wakeup, Normal, Learn Passkey, Tamper, Monitor Key, Fail Pending, Fail Enabled, Lrn Keys Stdby, Learn More Keys, Learn Pending, Auto Learn, Auto. Lrn. Done, No Coded Key, Check Second Key, VIN Check or VIN Timer.
Tamper Status - Inactive The scan tool displays Active or Inactive.
TDM State - Varies The scan tool displays Asleep, Wakeup, Normal, Learn Passkey, Tamper, Monitor Key, Fail Pending, Fail Enabled, Lrn Keys Stdby, Learn More Keys, Learn Pending, Auto Learn, Auto. Lrn. Done, No Coded Key, Check Second Key, VIN Check or VIN Timer.
Telltale Status - Off The scan tool displays On, Off, Flash or Invalid.
Total Keys Learned - Varies This displays Counts.
Transponder Key - Present The scan tool displays Present or Not Present.
Valid Key - Yes The scan tool displays Yes or No.