Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Digital Radio Antenna Connectors, Bolt, Expansion Sleeve & Retainer

Courtesy of GENERAL MOTORS CORP.

NOTE: DO NOT apply paint or clear coat to the antenna. This will damage the function of the antenna, causing poor reception or loss of signal reception.

NOTE: Use care when removing or installing the headliner. Excessive bending will damage the headliner.

Lower the headliner assembly. Do not remove from vehicle. Refer to Headlining Trim Panel Replacement .
Remove the antenna cable connection from above the AM/FM antenna module.
Remove the foam tape from the antenna cable connection.
Disconnect the digital radio antenna connectors (1).
Remove the antenna bolt (2) and expansion sleeve (3).

Fig 2: View Of Antenna Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the digital radio antenna.