Passenger Presence System Preload System Test Procedure (New Module)
- Empty the front outboard passenger seat.
- With the scan tool, perform the Passenger Presence System Preload System Test Procedure (Existing Module) .
- If the test fails, adjust the seat bottom trim, and massage the cover to ensure unwanted pressure is not present in the specified area. Proceed to the Passenger Presence System Preload System Test Procedure (Existing Module) to retest after adjustment is made.
- Once the test successfully completes, cycle the ignition key OFF.
- Perform the Diagnostic System Check - Vehicle after successfully completing the preload test procedure to ensure the system is functioning properly.