LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Vehicle Diagnostic Information) >> Specifications >> Electronic Brake Control Module Scan Tool Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Brake Control Module Scan Tool Information

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module Scan Tool Data Parameters

Parameter System State Expected Value Definition
Operating Conditions:  Engine ON
ABS Pump Motor - On The scan tool displays On or Off.
ABS Warning Lamp - Off The scan tool displays On or Off.
Brake Switch - Released The scan tool displays Released or Applied.
Brake Warning Lamp - Off The scan tool displays On or Off.
Engine RPM - Varies The scan tool displays RPM.
Lateral Accelerometer Input - Varies The scan tool displays M/S squared (2).
Left Front Wheel Speed - Varies The scan tool displays km/h (mph).
Left Rear Wheel Speed - Varies The scan tool displays km/h (mph).
LF ABS Hold Solenoid - Off The scan tool displays On or Off.
LF ABS Release Solenoid - Off The scan tool displays On or Off.
LF Wheel Speed Sensor - Normal This displays Normal or Open.
LR ABS Hold Solenoid - Off This displays On or Off.
LR ABS Release Solenoid - Off This displays On or Off.
LR Wheel Speed Sensor - Normal The scan tool displays Normal or Open.
Master Cylinder Pressure Sensor Input - Varies The scan tool displays Volts.
Parking Brake Switch - Applied The scan tool displays Released or Applied.
Right Front Wheel Speed - Varies The scan tool displays km/h (mph).
Right Rear Wheel Speed - Varies The scan tool displays km/h (mph).
RF ABS Hold Solenoid - Off The scan tool displays On or Off.
RF ABS Release Solenoid - Off The scan tool displays On or Off.
RF Wheel Speed Sensor - Normal The scan tool displays Normal or Open.
RR ABS Hold Solenoid - Off The scan tool displays On or Off.
RR ABS Release Solenoid - Off The scan tool displays On or Off.
RR Wheel Speed Sensor - Normal The scan tool displays Normal or Open.
Steering Wheel Angle - Varies The scan tool displays Deg.
Solenoid Relay State - Off The scan tool displays On or Off.
TCS Active - No The scan tool displays Yes or No.
TCS Active Lamp - Off This displays On or Off.
Throttle Angle - Varies The scan tool displays Percent (%).
Vehicle Speed - Varies The scan tool displays km/h (mph).
VSES Warning Lamp - No The scan tool displays Yes or No.
Yaw Rate Sensor - Varies This displays deg./sec.