Communication Interface Module Replacement
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the instrument panel center air outlet bezel. Refer to Instrument Panel Center Air Outlet Bezel Replacement
.
- Remove the radio. Refer to Radio Replacement .
|
| 1 |
Communication Interface with Mobile Telephone Transceiver Module Procedure
- Push outward on the two tabs to release the communication interface module from the bracket.
- Disconnect the electrical connectors.
- Reprogram the communication interface module after replacement. Refer to Control Module References
.
|