LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Cellular System, Entertainment System & Navigation System) >> Repair Instructions >> Communication Interface Module Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Communication Interface Module Bracket & Fasteners
    GM2014969Courtesy of GENERAL MOTORS CORP.
  1. Position the module bracket to the module.
  2. Install two module bracket mounting screws to each side of the module.
  3. Install the communication vehicle interface unit. Refer to OnStar Vehicle Interface Unit Replacement .
  4. Install the communication interface module. Refer to Communication Interface Module Replacement .
scientia non olet · About LEMON Manuals