Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cruise Control Switch Pin

Courtesy of GENERAL MOTORS CORP.

Engage the pin (1) and install the cruise control switch as shown in the illustration.

Fig 2: Identifying Cruise Control Switch Screws & Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (2).
Install the two screws (1).
Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .