LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Shift Interlock System) >> Repair Instructions >> Shift Lock Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Electrical Connector And Retaining Screw
    GM882531Courtesy of GENERAL MOTORS CORP.
  1. Install the Shift Lock Control Module/Shift Lock Solenoid assembly, then the retaining screw (2).
  2. Connect the electrical connector (1).
  3. Install the front floor console. Refer to Front Floor Console Replacement .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals