Installation Procedure
- Install the catalytic converter and the connecting pipe and the gasket to the front muffler pipe flange. Use the nuts to secure the converter and the connecting pipe and tighten to 30 N.m (22 lb ft).
- Using the nuts and the gasket secure the connecting pipe to the catalytic converter and tighten to 40 N.m (30 lb ft).
- Install the front exhaust pipe mounting bracket bolt and tighten to 40 N.m (30 lb ft).
- Install the rear heated oxygen sensor and tighten to 41 N.m (30 lb ft).
CAUTION:
Refer to Fastener Caution
.