Engine Control Module (ECM) - X1 (1.5L) (LV8)

Fig 1: Engine Control Module (ECM) - X1 (1.5L) (LV8) Connector End View

Courtesy of GENERAL MOTORS CORP.

Pin	Wire	Circuit	Function
1	BK/WH	-	Ground
2	BK/WH	-	Ground
3	D-BU	-	Knock Sensor (KS) Signal
4-5	-	-	Not Used
6	YE/BK	-	Low Reference
7	L-BU	-	Throttle Position (TP) Sensor Signal
8	L-GN/BK	-	Fuel Injector 3 Control
9	L-BU/WH	-	Fuel Injector 1 Control
10	OG	-	Low Reference
11	YE	-	Engine Coolant (ECT) Temperature Sensor Signal
12	D-GN/WH	-	Oxygen Sensor (O2) Signal
13	D-BU	-	Idle Air Control (IAC) B High Control
14	-	-	Not Used
15	PK	-	5-Volt Reference
16	D-BU	-	Low Reference
17	BK/WH	-	Ground
18	WH	-	Ignition Coil 2 and 3 Control
19	OG	-	Ignition Coil 1 and 4 Control
20	D-GN/WH	-	EVAP Canister Purge Valve Solenoid Control
21	D-BU/WH	-	Crankshaft Position (CKP) Sensor Signal
22	PK/BK	-	Fuel Injector 2 Control
23	BN	-	Intake Air Temperature (IAT) Sensor Signal
24	D-GN	-	Manifold Absolute Pressure (MAP) Sensor Signal
25	L-BU/BK	-	Camshaft Position (CMP) Sensor Signal
26	BN	-	Fuel Injector 4 Control
27	BN	-	Oxygen Sensor (O2) Low Reference
28	D-GN	-	Idle Air Control (IAC) A High Control
29	PK/BK	-	Idle Air Control (IAC) B Low Control
30	L-GN/BK	-	Idle Air Control (IAC) A Low Control
31	PU	-	5-Volt Reference
32	BN	-	Low Reference

Connector Part Information