Installation Procedure
WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the control module/receiver on its mounting bracket.
- Connect the control module/receiver electrical connector.
- Install the knee bolster with bolts and tighten to 10 N m (89 lb in).
- Install the instrument panel under cover.
- Connect the hood release cable to the hood latch release handle.
- Install the screws.
- Connect the negative battery cable.
- Complete remote keyless transmitter programmming. Refer to Remote Control Door Lock Transmitter Programming
CAUTION:
Refer to Fastener Caution
.