LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G5 L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Service and Repair




Crankshaft Position Sensor Replacement

Removal Procedure




1. Remove the starter. Refer to Starter Replacement (Service and Repair).
2. Disconnect the crankshaft position (CKP) sensor wiring harness electrical connector from the CKP sensor.




3. Remove the CKP sensor bolt.
4. Remove the CKP sensor.

Installation Procedure




1. Lubricate the CKP sensor O-ring seal with clean engine oil.
2. Install the CKP sensor.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the CKP sensor bolt and tighten to 10 Nm (89 lb in).




4. Connect the CKP sensor wiring harness electrical connector to the CKP sensor.
5. Install the starter. Refer to Starter Replacement (Service and Repair).

scientia non olet · About LEMON Manuals