LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of BCM
    GM1207700Courtesy of GENERAL MOTORS CORP.
  1. Install the BCM.
  2. Install the BCM wire harness connectors.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the BCM screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  4. Install the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  6. For a new or remanufactured BCM, setup the BCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals