LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G6 GXP, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fuel Tank Module Assembly Components
    GM1796305Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel level sensor electrical connector to the pump module electrical connector.
  2. Align the tab opening on the rear of the fuel level senor with the module alignment feature (3).
  3. Press the tab (1) on the sensor out away from the sensor securing the sensor to the module.
  4. Install the fuel level sensor wiring harness to the clip (2) on the module.
  5. Install the fuel tank module assembly. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals