LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G6 GXP, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of MAP Sensor & Bolt
    GM1838999Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the MAP sensor O-ring seal with clean engine oil.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the MAP sensor and bolt and tighten the bolt to 10 N.m (89 lb in).
    3. Fig 2: Identifying MAP Sensor & ETC Electrical Connectors
    GM1838990Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connector (1) to the MAP sensor.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals