October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Slide the ECM into the bracket.
- Push down on the ECM until the retaining tab snaps into place.
Courtesy of GENERAL MOTORS CORP.
- Connect the engine harness electrical connectors (2) to the ECM.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
.
- Reset the clock and preset radio stations.
- If a NEW ECM was installed, the ECM must be programmed. Refer to Control Module References
.