Vehicle Direction Alert Alarm Warning Module Scan Tool Information
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Veh Direction Alert Alarm Warn Module Scan Tool Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage | - | Varies | The scan tool displays volts. This is the current battery voltage. |
| Calibration Status | - | Inactive | The scan tool displays Active or Inactive. Active is displayed when the VDAAW calibration is in progress. |
| Calibration Status | - | Inhibit | The scan tool displays Inhibit or OK. Inhibit is displayed when the VDAAW detects a fault in the calibration status. |
| Diagnostic Mode | - | Inhibit | The scan tool displays Inhibit or OK. Inhibit is displayed when the VDAAW detects a fault in the diagnostic mode. |
| Mode LED | - | OFF | The scan tool displays Off or On. On is displayed when the VDAAW mode LED is illuminated. |
| Mode Switch | - | Inactive | The scan tool displays Active or Inactive. This is the status of the VDAAW mode switch |
| Operating State | - | OFF | The scan tool displays Off, Disabled, Not Ready, and Ready. This is the operating state of the VDAAW module. |
| Power Mode | - | OFF | The scan tool displays Off, Run, Crank Request, and Accessory. This is the state of power for the VDAAW module. |
| Power Mode | - | Inhibit | The scan tool displays Inhibit or OK. Inhibited is displayed when VDAAW detects a fault in the power mode. |
| Reference Voltage 1 | - | Varies | The scan tool displays volts. |
| Reference Voltage 2 | - | Varies | The scan tool displays volts. |
| Serial Data | - | Inhibit | The scan tool displays Inhibit or OK. Inhibit is displayed when VDAAW detects a fault in the serial data. |
| System Operation Status | - | Unknown | The scan tool displays Unknown, Normal, Disabled, and Failed. This is the status of the VDAAW modules system operation. |
| System Power Mode | - | Inhibit | The scan tool displays Inhibit or OK. Inhibit is displayed when the VDAAW detects a fault in the system power mode. |
Veh Direction Alert Alarm Warn Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Calibrate Module | This output control is used to calibrate the VDDAW module. |
| Direction Warning Left | This output control is used to calibrate the left sensor. |
| Direction Warning Right | This output control is used to calibrate the right sensor. |