LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> Torrent GXP, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L - Introduction >> Repair Instructions >> Secondary Fuel Tank Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. If the fuel level sending unit is being replaced, install the fuel level sending unit into the new fuel pump. Refer to Secondary Fuel Level Sensor Replacement .
    2. Fig 1: View Of Suction Port
    GM1346873Courtesy of GENERAL MOTORS CORP.
  2. Connect the suction port (1).
    3. Fig 2: Identifying Fuel Pump Module Assembly
    GM1857638Courtesy of GENERAL MOTORS CORP.
  3. Insert the new secondary fuel pump module (2) with the level sender and new fuel pump-to-tank seal. Ensure the orientation tabs are aligned.
  4. Use the J39765-A  to install the fuel pump lock ring. See Special Tools .
  5. Connect the EVAP line quick connect. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Install the fuel tank. Refer to Fuel Tank Replacement (AWD)  or Fuel Tank Replacement (FWD) .
scientia non olet · About LEMON Manuals