LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows System >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Component Testing >> Driver Window Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Window Switch

  1. Ignition OFF, disconnect the harness connector at the driver window switch.
  2. Test for infinite resistance between the control terminals A and D and the RAP terminal C with the RF window switch in the inactive position.
    • If not the specified value, replace the driver window switch.
  3. Test for less than 2 ohms between the control terminal A and the RAP terminal C with the RF window switch in the up position.
    • If greater than the specified range, replace the driver window switch.
  4. Test for less than 2 ohms between the control terminal D and the RAP terminal C with the RF window switch in the down position.
    • If greater than the specified range, replace the driver window switch.
  5. Test for infinite resistance between the control terminals G and H and the RAP terminal C with the driver window switch in the inactive position.
    • If not the specified value, replace the driver window switch.
  6. Test for less than 2 ohms between the control terminal G and the RAP terminal C with the driver window switch in the up position.
    • If greater than the specified range, replace the driver window switch.
  7. Test for less than 2 ohms between the control terminal H and the RAP terminal C with the driver window switch in the down position.
  8. If greater than the specified range, replace the driver window switch.
scientia non olet · About LEMON Manuals