Passenger Window Switch
- Ignition OFF, disconnect the harness connector at the passenger window switch.
- Test for infinite resistance between the control terminals G and H and the RAP terminal A with the switch in the inactive position.
- If not the specified value, replace the passenger window switch.
- Test for less than 2 ohms between the control terminal G and the RAP terminal A with the switch in the up position.
- If greater than the specified range, replace the passenger window switch.
- Test for less than 2 ohms between the control terminal H and the RAP terminal A with the switch in the down position.
- If greater than the specified range, replace the passenger window switch.