LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2010 >> Vibe GT, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 2.4L (Lax) - Repair Instructions >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the left fuel sender gage assembly for AWD.
    2. NOTE: Do not damage the wire harness.
  2. Install the fuel sender gage assembly by sliding it downward.
    3. NOTE: Make sure that the fuel sender gage arm does not bend.
  3. Connect the connector of the fuel sender gage assembly.
    4. Fig 1: Installing Fuel Sender Gage Assembly
    GM2016812Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel sender gage assembly by sliding it downward for FWD.
    5. NOTE: Make sure that the fuel sender gage arm does not bend.
  5. Connect the connector (1) of the fuel sender gage assembly.
  6. Install the fuel pump. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals