LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1999 >> Boxster Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel System, Electronic Injection - Diagnosis >> DME Diagnosis >> 2470 Programming DME control module >> Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2470 Programming DME control module: Programming

  1. Connect and switch on the Porsche System Tester 2 and switch on the ignition.
  2. Select Boxster  in the Vehicle type  menu.
  3. Select DME  in the Control unit menu  and press the double arrow key ">>".
  4. Select Program control unit  in the DME function selection  menu and press the double arrow key ">>".
  5. Select "Read control units" and press the double arrow key ">>".
  6. Install new DME control module.
  7. Select Program control unit  in the Control unit programming  menu and press the double arrow key ">>".
  8. Ensure that all requirements requested on the screen are fulfilled and then press the double arrow key ">>".
  9. The following message appears on the screen: "Input Vehicle Ident. Number". Use the double arrow key ">>" to accept the number displayed on the screen.
  10. The following message appears on the screen: "Please confirm input"  Confirm input with the "F7" key. Input DME programming code and press the double arrow key ">>".
  11. The following message appears on the screen: "Please confirm input"  Confirm input with the "F7" key.
  12. The following message appears on the screen: "Input new programming code"  Input new DME programming code and press the double arrow key ">>".
  13. The following message appears on the screen: "Please confirm input"  Confirm input with the "F7" key.
  14. The following message appears on the screen: "Input new immobilizer code"  Input immobilizer code and press the double arrow key ">>".
  15. The following message appears on the screen: "Please confirm input"  Confirm input with the "F7" key.
  16. The following message appears on the screen: "Select data record"  Select data record according to the allocation table and press the double arrow key ">>".

    The control module will now be programmed. Programming will take approx. 5 minutes.

    WARNING: Never interrupt the programming process.
  17. The following message will appear after the programming time has elapsed:"Programming was completed successfully"  Press the double arrow key ">>", switch the ignition off and then on again.

    This completes programming of the DME control module.

    WARNING: Risk of damage if allocation is incorrect!. Ensure correct allocation of the data record in the control module to the installed catalytic converter (refer to the allocation table).
    CATALYTIC CONVERTER NUMBER & VERSION

    Catalytic converter version  Vehicle Ident. Number Catalytic converter item number 
    OBD II control module (V  -range) WP0xx2  xxxV  xxxxxxx 996.113.031.06
    OBD II control module (V  -range) WP0xx2  xxxV  xxxxxxx 996.113.032.06
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.021.06
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.022.06
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.921.01
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.922.01
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.021.08
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.022.08
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.021.09
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.022.09
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.921.01
    RoW control module (bi-metal catalytic converter) WPOZZZ  xxxW  xxxxxxx 996.113.922.01
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.021.05
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.022.05
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.021.06
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.022.06
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.021.08
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.022.08
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.021.09
    OBD II control module (W  -range) WP0xx2  xxxW  xxxxxxx 996.113.022.09
    RoW control module (tri-metal catalytic converter, X  -range) WP0ZZZ  xxxXxxxxxxx 996.113.021.10
    RoW control module (tri-metal catalytic converter, X  -range) WP0ZZZ  xxxXxxxxxxx 996.113.022.10
    OBD II control module (tri-metal catalytic converter, X  -range) WP0xx2  xxxX  xxxxxxx 996.113.021.10
    OBD II control module (tri-metal catalytic converter, X  -range) WP0xx2  xxxX  xxxxxxx 996.113.022.10
    OBD II control module (tri-metal catalytic converter, X  -range) WP0xx2  xxxX  xxxxxxx 996.113.931.00
    OBD II control module (tri-metal catalytic converter, X  -range) WP0xx2  xxxX  xxxxxxx 996.113.932.00
scientia non olet · About LEMON Manuals