Obtaining read-out and saving vehicle data from DME control module

Connect the Porsche System Tester to the vehicle and start the System Tester. Switch ignition on. >> to continue.
Select vehicle type using the cursor keys.
Using the ->| key, move from the vehicle type to the list of control units.
Select DME with the cursor keys and press the >> key.
Select "Control unit programming" with the cursor keys and press the >> key.
Select "Read-out control unit (vehicle data)" with the cursor keys and press the >> key.
The note "Vehicle data read-out complete" will appear on the screen of the Porsche System Tester.
After replacement of the DME control module, the vehicle data is installed in the menu "Program control unit".