Coding Level Control Module

Information 

• During coding, it is essential to guarantee the power supply for the PIWIS Tester 9718. It is essential to connect a battery charger with a current rating of at least 40 A to the vehicle battery. 
• The PIWIS Tester 9718 instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations may occur with later software versions. 
• The procedure described here has been structured in general terms; different text or additions may appear in the PIWIS tester 9718  .

1. Connect the PIWIS tester 9718  to the vehicle and start it. Switch on the ignition. [>>] Continue.
2. Select vehicle type  using the cursor keys.
3. Using the [>>] key, move from the vehicle type to the list of control modules.
4. Select Level control  and press the [>>].
5. Select Coding  and press the [>>].
6. Select Select country and code with the F8.

   Select country
   Cayenne RoW
   Cayenne Thailand

7. Read out fault memory and erase if required.