Locking Triggering Unit

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

The power supply for the Porsche System Tester must be guaranteed during the locking process. Connect a battery charging device to the vehicle battery.
The Porsche System Tester instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. A discrepancy may arise with later software versions (from 15, 0).
The procedure described here has been structured generally, different text or additions may appear in the Porsche System Tester.
Locking is only possible after automatic control unit search.

Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on the ignition. Press [>>] to continue.
Select vehicle type using the cursor keys. Press [>>] to continue.
Select Airbag with the cursor keys and press the [>>] key.
In the Airbag menu, select Lock with the cursor keys and press the [>>] key.
Follow the instructions on the Tester.
Read out the fault memory and, if necessary, erase it.

If further faults exist, proceed in accordance with → 690101 AIRBAG DIAGNOSIS .