DTC U3000-54: Control Module - Missing calibration: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following pre-conditions are required to run the routine correctly: ignition is switched on, the occupancy seat module has gone through the seat assembly plant calibration, no collision event received from the restraints control module during the current ignition cycle, no faults present in the current ignition cycle, occupancy seat module has settled for 10 seconds, temperature is between 6° C (42°F) and 36°C (97°F), seat is bolted in original installation position
- Using the manufacturer approved diagnostic system, perform routine - Learn Seat Occupant Classification Zero Position (5007)