Programming Navigation Update On Central Computer
NOTE:
Voltage drop
- Irreparable damage to control unit
- Damage to control unit
- Fault entries in the control unit
- Control unit programming/coding is aborted
- Malfunctions in the control unit, even during programming
→ Switch off ignition before disconnecting the control unit.
→ Make sure that the power supply is not interrupted during programming/coding.
→ Connect the battery charger with at least > current 90 A to the vehicle battery.
- Switch on the ignition.
- Check contract period of Map Update service.
- Read out the version information on the central computer by selecting Car - System - Software update.
- Press Return to go back to the System.
- Select the Software Update menu on the control panel.
- Select the Load update menu on the control panel.
- Insert SD card into the slot (SD 1) in the glove box and confirm this on the control panel.
- Navigation Database must now be selected on the control panel.
- Select Start to start the update.
- The update can take a long time.
- When the navigation update is complete, confirm with OK.
- Press Return to return to the main menu.
- Remove SD card from the SD card slot.
- Perform function test on navigation system.
- Switch off the ignition.