All Models (1963-73)

Position front wheels in straight ahead position. Loosen tie rod lock nut on outer end of tie rod. Turn tie rod to set toe-in to specifications. Tighten lock nuts.

NOTE: After adjustment of toe-in, measurement A (see Fig 1) of tie rod must not exceed 1.6" (with key grip) or 1.2" (without key grip). For tie rods opposite to each other the difference between the measurements A must not exceed 0.08".

Fig 1: CHECKING LENGTH OF TIE ROD WITH KEY GRIP

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Fig 2: CHECKING LENGTH OF TIE ROD WITHOUT KEY GRIP

Courtesy of SAAB-SCANIA OF AMERICA, INC.