Cruise Control Switch
- Disconnect 4-pin connector from below instrument panel, left of steering column. Connect 12 volts to Brown wire of switch connector. Use test light on each terminal to check for continuity of wire harness and switch.
- With cruise control switch in "OFF" position, light should illuminate on Green wire terminal. Light should not illuminate on Red or Yellow wire terminals.
- With switch in "ON" position, light should illuminate on Green and Red wire terminals. Light should not illuminate on Yellow wire terminal. With switch in "RESUME" position, light should illuminate on all 3 terminals. With "SET" button depressed, light should illuminate on Red and Yellow wire terminals, but not on Green terminal.