LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1992 >> 9000 Base, 2.3 B, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> A/C Clutch Relay >> 900 Non-Turbo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

900 Non-Turbo

NOTE: References to wire colors for A/C clutch relays, refer to connector wires.
  1. Remove relay from relay panel. Relay panel is located under hood, on left side.
  2. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87B (Red wire). Replace relay if continuity exists.
  3. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87 (Green wire). Replace relay if continuity exists.
  4. Connect 12 volts to relay terminal No. 86 (Blue wire). Connect terminal No. 85 (Black wire) to ground. Relay should click.
  5. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87B (Red wire). Replace relay if there is no continuity.
  6. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87 (Green wire). Replace relay if there is no continuity.
scientia non olet · About LEMON Manuals