LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1992 >> 9000 S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> EZK Ignition Control Unit (900 Series) >> Ground Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuit

  1. Turn ignition off. Locate ignition control unit in engine compartment, forward of left front wheel housing. Connect negative lead of ohmmeter to ground. Backprobe ECU terminal No. 20 (Black wire). Resistance should be zero ohms. If not, repair open to ground. Harness grounding point is located on engine lift bracket.
  2. Connect negative lead of DVOM to a good ground. Backprobe ECU terminal No. 20. With vehicle running, DVOM should indicate less than one volt. If voltage is higher than one volt, check for open, corrosion or loose connection on ground lead.
scientia non olet · About LEMON Manuals