LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1995 >> 9000 CS, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.3L Turbo >> Ignition System >> Crankshaft Position (CKP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Raise and support vehicle (if necessary). Disconnect CKP sensor connector. Note routing of wiring and position of cable ties for installation. Remove CKP sensor mounting bolt and sensor. Note position of "O" ring on CKP sensor.
  2. To install, reverse removal procedure. Ensure CKP sensor and "O" ring are clean and that "O" ring is positioned correctly on CKP sensor. Lubricate "O" ring with petroleum jelly before installation. Tighten CKP sensor mounting bolt to 70 INCH lbs. 8 (N.m).
scientia non olet · About LEMON Manuals