LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1996 >> 9000 CS, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - TRIONIC Fuel Control System >> Circuit Tests >> DTC P0605 - Electronic Control Module (ECM) Malfunction >> Diagnosis & Repair Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis & Repair Procedure

  1. Clear DTC and road test vehicle. If DTC is reset, remove and check the following:
    • Condition of connector and connector sleeves.
    • ECM ground connection (terminals No. 24 and 25).
    • ECM power connection (terminals No. 1, 48 and 60). If no fault is found, go to next step. If fault is found, repair or replace as necessary.
  2. Clear DTC and road test vehicle. If DTC is not reset, repair is complete. If DTC is reset, replace ECM and retest system.