LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2002 >> 9-3 SE, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> Cooling Fan >> Cooling Fan Control Relay (5-Pin)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cooling Fan Control Relay (5-Pin)

  1. Remove relay from engine compartment fuse/relay block. See Figure. Check for continuity between relay terminals No. 1 and 3. If continuity is not present, replace relay. If continuity is present, check for continuity between relay terminals No. 1 and 2. If continuity is not present, go to next step. If continuity is present, replace relay.
  2. Using jumper wires, apply battery voltage to terminal No. 4 and ground to terminal No. 5. See Figure. Check for continuity between relay terminals No. 1 and 2. If continuity is not present, replace relay. If continuity is present, inspect associated wiring for short or open circuits. See WIRING DIAGRAMS article. Repair wiring as necessary.
scientia non olet · About LEMON Manuals