LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2003 >> 9-3 SE, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Control Module (Late; 9440) >> Adjustment-Replacement >> Control module, door >> To remove
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

To remove

  1. Perform Preparations prior to removing a control module.
  2. Remove the Front door trim.
  3. Lay the side of the door on a clean and soft surface.
  4. When changing the driver door module:  Remove the cell block from under the door module.
  5. When changing the driver door module:  Remove door trim screw.
    Fig 1: Illustration For Step 5 And 6
    G03617185Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the door module using a screwdriver. First undo the rear clip.

    Then undo the clips on the outer and inner sides of the door module. Pull the module carefully back/down.

scientia non olet · About LEMON Manuals