On-Board Diagnostics
Type of diagnosis:
- Once per driving cycle. Interrupted when fault criteria fulfilled or OK reported. Restarts next driving cycle.
Enable criteria
- General condition for this diagnostic trouble code: Atmospheric pressure must exceed 72 kPa as well as coolant and intake air temperature must exceed -7°C.
- Accepted transition diagnosis of oxygen sensor 1. Purge active. Idling. Max. one change in status of brake light switch. Purge adaptation higher than -7%. Car stationary for 8 s.
The diagnosis will start once the above conditions have been fulfilled. If the diagnosis is interrupted then the speed must exceed 0 on one occasion before it is allowed to restart.
Fault criteria
- Tank pressure pulsating at a frequency higher than 5.6 Hz with an amplitude exceeding 0.020 kPa.
Generating diagnostic trouble codes
- Diagnostic Trouble Codes are generated if the fault criteria are fulfilled and the dependants are OK.
Dependents
System reaction to a fault
- Integrity diagnosis of purge system blocked.
OK report
- Diagnoses for P1451 , P1452 and P1453 performed once and fault criteria not fulfilled. Fault criteria for P0452 or P0453 not fulfilled.
Fault handling: (For more information, see FAULT HANDLING III, OTHER EMISSION-RELATED COMPONENTS AND FUNCTION ).
- Type III.