On-Board Diagnostics
Type of diagnosis:
- Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
Enable criteria:
- Crankshaft stationary, even after ignition OFF. Car stationary. The other two absolute pressure sensors deviate less than 10 kPa from each other.
Fault criteria:
- Sensor value deviates more than 15 kPa from charge air absolute pressure sensor or intake air absolute pressure sensor.
Dependents:
System reaction to a fault:
- Charge air adaptation blocked and zeroed. The charge air pressure start value is used as a substitute value. The purging is blocked. All diagnoses with the general condition that the atmospheric pressure must exceed 72 kPa and the engine coolant and intake air temperature must exceed -7°C are blocked.
OK report:
Fault handling: (For more information, see FAULT HANDLING III, OTHER EMISSION-RELATED COMPONENTS AND FUNCTION ).
- Type III.